Scroll to continue
Plant Hire
Our extensive fleet of specialist piling equipment is available for hire on a short or long-term basis throughout the UK at competitive rates.
If you require skilled labour and equipment to install or extract your own piles, we have the resources to provide as much or as little as your project needs.
Call or email for a no obligation quote, or if you have any questions about your project, we’d be delighted to help.
We hire under Construction Plant Hire Association (CPA) Conditions.
The F201a is designed to press-in U piles up to 600mm wide and has a pressing force of 150 tonnes. It can be operated in Standard and Water Jetting or Supercrush modes
The ECO700S is designed to press-in Z piles up to 708mm wide and U piles up to 750mm wide and can be used in Standard, Water Jetting, or Supercrush (hard ground) modes
The F301 is designed to press-in Z piles up to 708mm wide and U piles up to 750mm wide and can be used in Standard, Water Jetting, or Supercrush (hard ground) modes
The SCZ-675WMG is designed to silently press-in pairs of Z piles simultaneously, in up to 1.4m width sections in either Standard, Water Jetting, or Supercrush (hard ground) modes
The PJ3 Water Jetter, when used with a Silent Piler, reduces penetration resistance and aids pile installation by means of lubrication, temporarily loosening and softening the ground.
Compact but powerful ABI Mobilram Telescopic Leader Rig fitted with EU Stage V ultra-low emissions engine for use with MRZV 16VV Vibration Hammer.
ABI Mobilram Leader Rig fitted with Telescopic Leader Mast, for use with MRZV 17VV Vibration Hammer, MDBA 3200 Auger Drive, or Delmag Impact Hammer.
Bauer RTG multi-purpose Telescopic Leader Rig with MR150 AVM Hydraulic Vibrator, capable of installing pairs of sheet piles when fitted with T1 Double Clamp Assembly.
21 tonne ‘Rubber Duck’ Wheeled Excavator with outriggers for added stability. Can be used with the SG/SP-50 Movax ‘side grip’ attachment, Dangle Drill or BSP Air Hammer.
25 tonne Crawler Excavator fitted with 800mm wide track shoes. Can be used with the SG/SP-50 Movax ‘side grip’ attachment, Dangle Drill or BSP Air Hammer.
34 tonne Crawler Excavator fitted with 800mm wide track shoes. Can be used with the SPH-80 Movax ‘side grip’ attachment, Dangle Drill or BSP Air Hammer.
38 tonne Crawler Excavator fitted with 700mm wide track shoes. Can be used with the SG-75 Movax ‘side grip’ attachment, Dangle Drill or BSP Air Hammer.
35 tonne Excavator for use with the SG-75 Movax attachment, DH-25 Impact Hammer, MPL-300 Multi-tool Piling Leader, and RHP-5 Rotary Drive for CFA.
38 tonne Excavator used with SG-60 Movax attachment, DH-25 Impact Hammer, MPL-300 Multi-tool Piling Leader, and RHP-5 Rotary Drive for CFA.
50 tonne Excavator for use with the SP-70 Movax attachment, DH-25 Impact Hammer, MPL-300 Multi-tool Piling Leader, and RHP-5 Rotary Drive for CFA.
A compact drilling rig which can be used for both CFA and displacement piles. Equipped with a self-erecting leader, wide undercarriage and low centre of gravity, aiding stability.
Multi-purpose Leader Rig equipped with a 15 tonne-metre torque rotary head suitable for installing CFA piles up to 750mm diameter and 21m deep in tough soil conditions.
Road transportable and capable of supporting a uniformly distributed load of 20kN/m² per float. Can be assembled to create a wide variety of different platforms.
Fully modular and capable of supporting uniformly distributed heavy duty loads. For added safety, handrails provide edge protection, but are removable to allow plant access.
Used to provide access or reduce axle weight pressures, Bog Mats are often used in conjunction with our Pontoons and Steel Crane Mats. Capable of carrying up to 75T per mat on flat ground.
Ivor King are the leading industry specialists in the use of Giken Supercrush Silent Piling technology. We can install sheet piles into hard ground, up to and including solid rock, vibration-free.
Need Sheet Piles? Our dedicated Pile Hire & Sales division is on hand to support all of your permanent and temporary sheet piling needs.
Our in-house technical design team of professionally qualified engineers and geotechnical experts will work with you to develop the right solution for your project.
At the core of Ivor King is our people – a skilled and experienced team comprising some of the industry’s most talented engineers, designers and operational staff.
